Eliminate Error Code 0x80070035 On Windows 10 With Easy Hacks

Are you facing any trouble while connecting to the Windows 10 operating system? An error notification saying “Error code: 0x80070035, The network path was not found” appears at the time of accessing some data and file, even if the connections are accurate. Then, you need to know that, there are various reasons behind this error, among them, Windows Defender Firewall is the prime reason. It must be blocking the system resources. If you are getting this kind of error messages, then you don’t need to panic. Here, you will get the solution that can resolve the error code 0x80070035. Keep reading this article, to learn some of the effective solutions that can help you to get rid of the issue.

Troubleshoot Error Code 0x80070035 Windows 10 with Easy Guide

Here, in this part of the article, we are going to present some easy and effective solutions that can help you to troubleshoot the problem with error code 0x80070035 Windows 10. So, let’s start to read the upcoming part of the article and resolve the problem on your own.

Solution 1: Verify and Reset the TCP/ IP NetBIOS

If you are encountering error 0x80070035, then the first thing that you should do is to verify and reset TCP/ IP net BIOS. If the steps are unknown to you, then you must follow the steps that we have mentioned in the following part of the article.

  1. At first, press the Win key + R button both at the same time from the keyboard. After that, the Run dialogue box will appear on the screen.
  2. Then, write ‘ncpa.cpl’ in the appearing dialogue box. And hit the Enter button from the keyboard. This will help you to evoke the Wi-Fi properties.
  3. After that, right click on the Wi-Fi network that you intend to use and click on the Properties option.
  4. Thereafter, you need to double click on the Internet Protocol Version 4 option to launch the properties.
  5. Furthermore, you need to proceed with the next step by clicking on the Advanced option, then move on to the WINS tab.
  6. At the next step, open the NetBIOS settings tab and select the Radio button next to “Enable NetBIOS over TCP/IP” label.
  7. Once done, now click on the OK button to save all the changes that you have made.
  8. Then, restart the system and check if the problem is resolved or not.

Solution 2: Disable the Third Party Security Software and Firewall

As we have mentioned that the 0x80070035 error code may happen due to firewall blockages, so you should try to disable the third-party security software and the firewall momentarily on the system. Here, are the steps that can help you to do so.

  1. At first, press the Win key + R button both at the same time from the keyboard. This will help you to open the Run dialogue box  
  2. Then, type ‘Control Panel’ in the search box. Then, click on the Control Panel option from the appearing list of results.
  3. After that, click on the Windows Defender Firewall option from the list.
  4. Thereafter, click on the Turn Windows Defender Firewall option from the list which you can find on the left side of the computer screen.
  5. Now, click on the Turn Off Windows Defender Firewall (not recommended) option.
  6. Once done, now click on the OK button. This will help you to save all the changes that you have made and finally, restart the computer.

Solution 3: Remove the Windows Credentials

You can get rid of the problem regarding Windows error 0x80070035 by removing the Windows credentials from the system. Go through the steps which are described below:

  1. At first press the Win key + R key both at the same time from the keyboard. Then, it will open the Run dialogue box on the computer screen.
  2. Then, type ‘Control Panel’ in the appearing dialogue box. Then, select the Control Panel from the appearing list of results.
  3. Thereafter, click on the Credential Manager option.
  4. Then, delete all of the Windows credentials data, from the Windows Credential section. And restart the system.
  5. After that, install those Windows Credentials that you need.
  6. Otherwise, you may click on the Add A Windows Credential option, and then you need to add the credentials manually.

Solution 4: Use the Command Prompt

Use the Command Prompt option to fix the problem. Follow the steps that we have mentioned in the upcoming part of the article:

  1. At first, you need to press the Win key + R key both at the same time from the keyboard, to open the Run dialogue box.
  2. Then, write ‘cmd’ in the appearing dialogue box. Then, click on the Command Prompt option from the appearing list of results.
  3. After that, you will need to type the following commands. Then, press the Enter button after entering each of the commands: ipconfig /release, ipconfig /flushdns and ipconfig /renew.
  1. Thereafter, reboot your computer and check if the problem is resolved or not. If the problem does not get resolved by entering the commands which are mentioned in the above part of the article, then you should try the alternative commands that we have mentioned below:

  • ipconfig /flushdns

    • nbtstat –r
    • netsh int ip reset

  • netsh winsock reset                             

Solution 5: Enable the Network Discovery

If you face any difficulty to apply the steps that we have described in the earlier part of the article, then you should try to disable the network discovery. Now, we are going to discuss the steps that will help you to do so.

  1. At first, you need to press the Win key + R button both at the same time from your keyboard to open the Run dialogue box.
  2. Then, write ‘Control panel’ in the appearing dialogue box. And, click on the Control Panel option to open it from the appearing list of results.
  3. Thereafter, click on the ‘Network and Sharing Center’ to open it.
  4. After that, select the Change Advanced Sharing settings option that you can find from the left side of the computer screen.
  5. Once you are done with the steps from the previous part of the article, now switch the Radio button to Turn On Network Discovery option and verify the ‘Turn On automatic setup of network connected devices’ box. And, finally, restart the system.

Solution 6: Verify the Sharing Settings of the System

If you are still facing the problem Windows error 0x80070035, then you should check the sharing settings of the computer. The following steps will help you to do so.

  1. At first, right click on the drive that you want to access. Then, click on the Properties option.
  2. Thereafter, move on to the Sharing tab and check if the network path is showing ‘Not Shared’.
  3. Then, click on Advanced Sharing.
  4. After that, make a tick mark on the ‘Share this folder’ option, which you can find on the Advanced Sharing Window.
  5. Once done, now enter the particular driver name and click on the Apply button.
  6. Now, click OK button to save the changes in your computer.

Solution 7: Change the Security Settings of the Network

If none of the methods from the above part of the article helped you to fix the problem regarding error code 0x80070035 Windows 10, then this is step will definitely help you to get rid of the issue. You should change the Security setting of network connectivity. In the following part of the guide, we are going to discuss the steps.

  1. At first, move on to the bottom left corner of the computer screen and click on the Start button. And, type ‘Run’ in the search box. Otherwise, you can press the Win key + R button both at the same time from the keyboard to open the Run dialogue box.
  2. After that, write ‘secpol.mscin the appearing dialogue box and hit the Enter button. Then, the Local Security Policy window will appear on the screen.
  3. Thereafter, click on the Local Policies option and select the Security Options.
  4. Now, go to the right pane of the computer screen and double click on it. Then, click on the Properties option for Network security: LAN Manager Authentication level.
  5. Now, click on the “Send LM and NTLM-use NTLMv2 session security if negotiated” option.
  6. Now, check the system to see if the problem still persists or not.

Wrapping up…

Through this article, we have provided you with some of the easy and efficient solutions that can help you to get rid of the problem on Windows error code 0x80070035. If you have any more queries regarding this topic, then you can leave a comment down in the feedback section.

Maria Colombo
Maria Colombo
Articles: 1205