Solutions To Overcome BSOD Error 0x0000007b?

Every Windows user has once surely encountered a Blue Screen of Death error.

Probable Causes which lead to the Error 0x0000007b:

The error 0x0000007b might be a result of the causes that are listed below. So take a look at them:

• When the bootloader files become corrupt, missing, or misconfigured, then this issue might occur. This mainly happens because of boot sector viruses, sudden power outages, or disk write errors.
• Due to incorrect BIOS configuration, this error might occur. This happens when Windows was booted and installed by using one mode but configured via different mode.
• If the system registry became corrupted
• When the EFI bootloader becomes corrupted or misconfigured
• Boot sector viruses might also cause this error.

Brilliant Methods to Tackle the Stop 0x0000007b Error Code:

Once you get the stop 0x0000007b error in your Windows PC, it becomes difficult for you to resolve it, especially if you are not that familiar with the Windows system. If you are not tech-savvy, then it is advised to follow the methods described below in detail to get rid of this annoying BSOD error:

Method 1: Change Windows Configuration to Fix This Error

One of the most exclusive ways to eliminate BSOD 0x0000007b is to change the configuration of Windows. You can easily do that by performing the steps described below:

1. First, shut down your PC and reboot it by pressing the “Power” button.
2. While your PC is booting up, you need to press F2.
3. Now, enter the BIOS and click on the Advanced option. From there, change the SATA Operation from AHCI to ATA.
4. Further, select the “Yes” option to save the changes.
5. After that, press the F10 button continuously until and unless you find that a window pops up with the “Save configuration and reset?” message.
6. Then, select the Yes option and you will get to see a setup window. Now, you have to Setup Windows again.
7. You can do so by pressing the Enter button.

Now, if you want to repair the Windows installation by using the Recovery console, then press “R.” Else, if you want to quit Setup without the installation of Windows, then press the F3 button.

Method 2: Use the Windows Installation Media

You can go through this alternative method to fix the stop 0x0000007b error. Just perform the steps as per the instructions given below:

• First of all, set USB as a Windows installation drive in advance and try to connect it to your PC.
• Now, restart your PC and continuously press F12 until the Boot Windows menu opens up.
• Next, you should select your USB as the boot drive in order to reboot Windows.
• In case, if it fails, then reboot your PC and enter the BIOS by pressing the F2 button.
• Further, you need to set SATA Mode from AHCI to IDE.
• Then, save the changes and reboot your PC.
• After that, you can choose to load Windows from a USB flash drive and enter a Windows Setup window by pressing the Enter button.

Hope that Windows users can overcome this annoying error by applying the above procedure.

Method 3: Reinstall the Windows System to Fix The Error

You can directly reinstall the Windows system on your PC to fix this particular error. But doing this involves two steps, so go through them to get the error fixed in no time:

• At first, you have to extract the old PC data or can also opt to remove the hard drive to a new PC.
• This will back up your present data in the PC and then reboot your PC.
• Now, you need to reinstall your Windows system to resolve error 0x0000007b.
• You can do so by visiting Microsoft’s website and then downloading a Windows 7 system image for your PC
• Then, try to install the image on your USB drive and connect it to your PC
• Now, enter the BIOS by pressing the Del button and set USB as the boot media.
• After that, the system will load and you just need to follow the on-screen prompts to install Windows on your PC. This procedure will surely fix the error.

Method 4: Rebuild the BOOTMGR File

Sometimes, replacing the damaged BOOTMGR with the correct version can resolve this critical 0x0000007b error. Here is how you can do that:

• In the beginning, try to boot from the Windows install disc.
• Now, select the proper language, time, and keyboard input. Then, click on the Repair your computer option.
  
• After that, choose the Windows installation drive. Generally, it is the C:\ drive and then click on the Next option.
• Further, when the System Recovery Options box appears, choose Command Prompt.
• Next, type in the following command “Bcdboot C:\Windows /s D:\” and click on the Enter button. [ Here C:\ is your Windows installation folder, whereas D:\ is your active boot partition.

Method 5: Use SFC Command to Repair Corrupted System Files

If you are using Windows 7 or Windows Vista, then it is possible to use this in-built Windows SFC tool to scan the computer’s system files automatically and repair them. Below are the steps to run this SFC scan tool. So, follow them carefully:

• First of all, try to boot from your Windows install disc.
• Now, select the proper language, time, and keyboard input. Then, click on the Repair your computer option.
• After that, choose the Windows installation drive. Generally, it is the C:\ drive and then click on the Next option.
• Further, when the System Recovery Options box appears, choose Command Prompt.
• There, you need to type in the following command “ sfc/scannow/offbootdir=D:\ /offwindir=D:\Windows\.” Next, click on the Enter key.

Now, you can check whether the error gets resolved or still persists in your Windows device.

Hopefully, by going through the above-mentioned steps carefully, you will be able to resolve the stop 0x0000007b error. But in case, you fail to fix it, then the best way is to opt for a professional’s assistance to get rid of it.