Windows 10 comes along with innovative and more convincing features than ever. However, being a one of the Operating Systems from the bunch out of the house of Windows house, you need to watch out for real-time errors that might appear without any prior notice. Any kind of small or big unwanted modifications can trigger a real-time error on your Windows device. The most profoundly visible is the “WHEA UNCORRECTABLE ERROR”. You may also receive this error either in the form of an error message as “The system encountered an uncorrectable hardware” or in codified form i.e. Bugcheck 0x00000124.
Generally, this error is typically associated with physical hardware failures. If you are in the middle of this error and want to mitigate it, then this article can provide to help you. Read this document and get to know the after effects, as well as, the root cause of the error. You will also gain access to a few impeccable means that can resolve the problem within an hour.
How to Detect “Bugcheck 0x00000124 Windows 10” Error?
According to the research conducted by the Windows Hardware Error Architecture (WHEA), this bug typically indicates that there is a fatal hardware corruption and system needs to close in order to collect the error info. You may note that an abrupt blue screen appears, notifying you about the problem. This whole process will hinder your work and at the same time will prevent you from accessing the system. Subsequently, the system might restart on its own, but within a flicker of time will again present you with the Blue Screen of Death.
Underlying Reasons Leading to Bugcheck 0x00000124 error on Windows 10
When discussing hardware fallacy, it summarizes a long list of causes that can prompt such an error. Here, we are going to notify you about the top 5 factors that can generate error messages on your computer screen:
- If you are using a faulty RAM or the hard drive is corrupted, then you might face the blue screen of death.
- Prolong use of the system reduces the time span for cooling down. And thus can generate immense heat. This overheating can subsequently damage any hardware component.
- If the memory or the processor fails to function accurately, then it can lead to WHEA_UNCRRECTABLE_EROR.
- If the device drivers are not compatible, then it can conflict with the system files, and thus create an error.
- Enabling the BIOS overclocking for a prolonged time can also lead to this trouble.
Fix Bugcheck 0x00000124 Windows 10 Error: 6 Easy-to-Apply Hacks
As discussed earlier, 0x00000124 Whea_Uncorrectable_Error is indeed an annoying situation. And adding to the disgrace, the error message is a clear indication that Windows is unable to resolve it automatically. Being a component of Blue Screen error, you cannot log in into the desktop screen and thus, to apply the fixes, you need to enter into Safe Mode. The steps to enable the Safe mode are quite feasible and are given down under:
- At first, ensure that all the external devices are disconnected from the system. Then, insert “Windows 10 installation media” into the relevant port and restart the device.
- Based on the system model you are using, keep pressing the Esc, Delete, F2, F8, F10, F12 or Backspace function keys to navigate to the BIOS settings. Now, all you have to do is select your preferred language and click on the Next button.
- In the bottom-left corner of the screen, you will get the option “Repair your computer”, click on it. Further, navigate to Troubleshoot window, click on the Advanced option. From the new window, locate and click on Startup Settings and choose “Enable Safe Mode”.
Finally, restart the system to help it configure the recent changes and wait till the device enters into “Safe Mode”.
Now, you are well equipped to proceed to the workable steps that can evade Bugcheck 0x00000124 error.
Hack 1: Update the Drivers
Whenever you note that a piece of hardware is not working, then it is high time, you must get the drivers updated. Using Windows Update Service is considered to be the safest way to get the drivers updates. The package is duly signed and verified by Microsoft and thus reduces the probability of installing malicious files. This is an automated process, and thus the steps are way to simple to follow:
- Open the Settings application and click on ‘Update & Security’.
- Locate the Windows Update option and select the ‘Check for updates’ button.
- Now, through the Windows Update service, the new version will automatically get installed, whenever the hardware manufacturer publishes it.
Additional Method:
However, if you are trying to update any particular device driver, then use Device Manager:
- To start with, navigate to Start and try to locate Device Manager. Click the top result to open the experience and subsequently, expand the hardware category that you want to update.
- Right-click on the device and click on ‘Update Driver’. Finally, click on ‘Search automatically for updated driver software’ option and close all the active windows.
Whenever the latest driver versions will be resealed by the manufactures, it will automatically get installed in the system. If even after updating the drivers, the BSOD still reappears, then move to the next alternative.
Hack 2: Uninstall Recent Installations
If the Bugcheck 0x00000124 error started occurring just after you installed any third-party application, then uninstalling that unwanted programs are one of the most important tasks:
- Go to the Start menu and click on Settings. In the system menu, try to locate the System option.
- Now, from the left pane of the window, select ‘Apps and Features’ to view the list of all the installed applications. Locate and select the application that you prefer to uninstall.
- However, before hitting the Uninstall button, you must note whether you have permission to remove it.
- After gaining the administrative rights, hit the Uninstall Button. A pop-up window will appear asking your confirmation, place an affirmative answer and wait for the process to get accomplished.
Now, all you have to do is restart the system and check for the error. If the blue screen is becoming a repetitive issue, then try to scan the whole system.
Hack 3: Perform a Full System Scan
If you suspect that the system files might be corrupted or gone missing, you should go for the SFC. It is a command utility that can scan the integrity and replace the damaged system file with a workable version. To start with, open the Power User, using the Windows key + X keyboard shortcut and select Command Prompt (Admin). This will help you to gain administrator rights to run SFC. In the Command Prompt window, type ‘sfc /scannow’ and hit the Enter key. When the scan completes you will view either of the four messages given below:
- First ‘Windows Resource Protection did not find any integrity violations’.
- ‘Windows Resource Protection could not perform the requested operation’.
- And, ‘Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.Log %WinDir%\Logs\CBS\CBS.log’.
- Then, ‘Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log %WinDir%\Logs\CBS\CBS.log’.
Try to run the scan thrice in order to eliminate all the odds permanently.
To View the Scan Results:
If you want to view the detailed information of this scan, then you need to make a readable copy. For that gain move to the Power User menu and select Command prompt. Type the command: findstr /c:”[SR]” %windir%\Logs\CBS\CBS.log >”%userprofile%\Desktop\sfclogs.txt”. By pressing the Enter key, execute the command and open the sfclogs.txt located on the desktop. You can use Notepad to view all the details of the scanned system files and information for files that couldn’t be repaired. Now, restart the system and again verify if this process was able to eliminate the Bugcheck 0x00000124 error or not.
Hack 4: Scan and Check Hard Disk for Errors
If even after running the SFC tools, the error persists, then you need to run CHKDSK in Windows 10. This will help to scan and repair the potential hard disk errors.
To begin the scan, right click on the faulty drive and to bring up the drop-down menu. There select properties and click on the Tools tab and under Error-checking area, click on the Check button. The system will automatically check for the error. If no errors are found, then you will receive a message ‘You don’t need to scan this drive’. If errors are found, then the system will depict a different message i.e. “Restart your computer to repair the file system. You can restart right away or schedule the error fixing on next restart”. Click on the Show details tab and note the relevant log information. Finally, restart the system and you will note that all the bugs are fixed automatically.
Hack 5: Use Memory Diagnostic to fix Memory (RAM) Errors
Windows comes along with an effective tool Windows Memory Diagnostic tool that you can use to check the possibilities of faults within RAM. You get the benefit of running a comprehensive test and in turn, the test results will help you to take immediate action. To begin, navigate the Control Panel and type ‘memory’ on the search bar, this will open the Memory Diagnostic Tool. In the Diagnostic window, you will get two options, choose either of them based on your preference. The options are: ‘Restart now and check the problems’ and ‘Check for problems the next time I restart my computer’.
As soon as you restart the system, the Memory Diagnostics Tool will automatically start the scanning process. try not to hinder the process as it may take a couple of minutes. Keep monitoring the progress bar and finally, a status notification will inform you that the process was successful. This will definitely resolve all hardware associated faults.
Hack 6: Disable Overclock in BIOS
Additionally, you can also try to disable the overclock BIOS. Now, starting with the disable process, open the Start menu and go to Settings. Locate and select the ‘Update and Security’ option, then move to the Recovery tab. Navigate to Advanced Startup, and click on the Restart button. as soon as the computer restarts, again go to Advanced startup and click on Troubleshoot. Then, select on Advanced Options, to go to UEFI Firmware Settings. Again restart the system, to incorporate the changes. Now, the computer should open in BIOS automatically. Go to the Advanced tab, select Performance and try to locate Overclocking option and disable it. Press F10 repeatedly to save the changes in BIOS and to start the computer normally.
Further, if you are using any overclock software, then try to uninstall it, to evade the risk of Bugcheck 0x00000124 on Windows 10.
Additional Tips:
If you want to prevent this bug in future, then these tricks can help you out. Hence, take a gance below:
- Check the memory usage on a timely basis along with disk space, to prevent overloading the processor.
- Try to keep the system up-to-date, by installing the latest hardware drivers, as well as, OS. Since the manufactures keep incorporating and improving the software to tackle developing error codes, this can help to prevent certain real-time error.
- Further, creating a restore point is also a wise choice to prevent system file from damages and to protect important files on the system.
- Last but not least, always keep a check whether any cooling systems such as fans are functional or not, prevent overheating of the device.
Closure…
The most interesting fact about these methods discussed above is that you do not need to be accustomed to the technical terms. Just follow the steps as directed and try not to skip any in order to gain complete resolution. Further, you can also share your experience about Bugcheck 0x00000124 Windows 10 in the feedback box, right below this article.
