Learn to Fix HP Printer Error Code 0x803C010B With the most Effective Methods

Among the top electronic brands, HP (Hewlett-Packard) manufactured printers are the most popular one. However, at the time when you are going to use it and get the HP printer error code 0x803C010B as an end result, then this is what we are not expected. If you are stuck in this situation as well and want to know the complete story about the issue along with the solutions for it, then you are in the correct place. After a thorough study of this article, you will get to learn the effective methods, by which you will be able to fix the problem efficiently. So, have a look till to the end.

What is Responsible for the HP Printer Error Code 0x803C010B?

According to the experts’ report, HP printer error code 0x803C010B occurs mainly due to a network protocol which is named as SNMP. It’s abbreviated as Simple Network Management Protocol. The function of this protocol is to manage devices on the network and thus transmits the general information for the printers. A few of the printers do not work with this protocol, and this may be the reason for which you are getting the error. The way to solve this matter is very simple and to know the steps, you need to proceed further.

A software glitch of the printer can also be the reason for the error 0x803C010B. If this is the case, then you will be able to get rid of it simply by following the reinstallation steps of the printer device.

Effective Methods to Solve HP Printer Error Code 0x803C010B:

If you are in search of methods to get the HP printer error 0x803C010B fixed, then you need to scroll further to learn the methods as below.

Method 1: Disable Simple Network Management Protocol to Fix HP Printer Error 0x803C010B

This is the primary method which you can rely on to fix the HP printer error code 0x803C010B. So, check it out.

Open Control Panel

At first, you need to open the Control Panel window. And there are different practices by which you can do this job. Here, we have enlisted a few of such practices, so check and proceed with the one which you like.

Practice 1: Press the Windows logo and the letter R key both at a time, this will get you the Run bar window open. Then, on the Run bar type control and click on OK. This will get you the Run bar open.

Practice 2: Simply tap the Windows logo key, to get a search bar. Then, on the search bar type control. Next, from the search results, click on the Control Panel option, which is most probably the top one. Alternatively, this will also get you the Control Panel window open on the screen.

Locate your HP Printer under the “Devices and Printers” section

Now, check the “View by” section of the Control Panel, which is near to the top right-hand corner. Is it set as Large icons or not. And if not, then you need to drop down the menu beside View by and select the Large icons option.

After that, from this transformed Control Panel, search for the “Devices and Printers” section, and click on it. Then under this open window, go to the Printer section, and select your HP device.

Go to HP Printer Properties window to Ensure the Enable of Standard TCP/IP Port

Next, right click on the printer, and select the “Printer properties” option, this will open up the HP Printer Properties window.

Further, under this HP Printer Properties window, click on the Ports tab. After that, make sure that the checkbox beside Standard TCP/IP Port is active and if not, then make it. Furthermore, click on the “Configure Port” button, to continue the further steps.

Uncheck the “SNMP Status Enabled” box> OK

Now, get the checkbox for “SNMP Status Enabled” under this Configure Standard TCP/IP Port Monitor titled window. After you find the checkbox, disable it, if you see that it is active. Next, click on the OK button, to confirm this port settings. Then, close all the open windows and reboot the PC. Once it’s on, check if this method works for you in solving the HP printer error code 0x803C010B.

Method 2: Reinstall the Printer Device

In most of the cases, the above method works. If after following the method, still the error exists then try these steps below.

  1. At first, open the Control Panel window. The steps to do this is already mentioned above.
  2. After that, set the “View by” into Large icons.
  3. Next, from the available options under the Control Panel window, select “Devices and Printers”.
  4. Now, from the open window scroll down to the Printer section. And then, select your HP printer and right click on it.
  5. After that, from the menu window select Remove device> Yes, to confirm. This will remove the printer device from your computer.
  6. Next, disconnect the printer from your PC. After which, restart the computer and reconnect the printer to it, it will automatically install the drivers, which is needed to run the printer. Now, proceed to do a printing job to check if it resolves the issue.

All these above are the methods, with the help of which a lot of users get an effective result in solving HP printer error code 0x803C010B. Hopefully, you will also get the same. If you have any more queries, you can fill it in the command box below.

Maria Colombo
Maria Colombo
Articles: 1190