Linksys Authentication Error generally occurs if there is a problem with the settings of the Linksys router. Sometimes, software issue can lead to this error. Once, this problem appears on your Linksys router, then it will restrict you to connect your device with the internet.
However, this is a common problem and you can quickly get rid of it. But you need to follow a proper strategy.
Therefore, if you want to troubleshoot this frustrating issue, then you should read this content thoroughly. As here we are going to discuss each and everything which will surely help you to solve the problem instantly.
Root Causes of Linksys Authentication Error
There are several reasons which can be responsible for this Linksys error. Here, we have highlighted some of them.
- If there is a networking problem, then it is a valid reason for this issue.
- Sometimes, improper settings of your device can lead you to this trouble.
- Occasionally, due to the IP conflict, you might face the authentication error.
- In case, by mistake you enter the wrong username or password, then also you might face this trouble.
- Also, faulty wireless connection be responsible behind the occurrence of the problem.
These are some of the common causes. Now, if you want to fix Linksys Authentication Error, then you read the next section.
Solutions to Troubleshoot the Linksys Authentication Error
If you deal with this Linksys error, then we suggest you to apply the undermentioned solutions one by one. You might not need to apply all the solutions. We believe, if you follow a few of it, your queries will be resolved. Check them out.
Solution 1 – Reboot your Device
If you deal with the Linksys Authentication Error, then it is better to reboot both the Linksys router as well as your connecting device. This is one of the most workable solutions and very easy to perform.
So, turn off both the device and wait for at least 5 to 10 minutes. Then, again turn on them and check if the issue has been troubleshoot or not.
Solution 2 – Reset the Linksys Device
If the above solution does not work for you, then we suggest you to reset your Linksys router. To follow this solution, take a look below.
- In the beginning, you should turn on your Linksys router. After that, search for the reset button which is located on the backside of the router. However, it totally depends on the model that you are using.
- Now, take a paper-clip or pin and press and hold the reset button for at least 30 seconds and then release it.
- During this procedure all the lights will start blinking and you should wait until all the lights of the router get stable.
Once, you have successfully done with it, start your Linksys router and try to connect your device with the internet. However, if you fail to do that, then do not panic and continue reading.
Solution 3 – Check the WiFi Settings
In order to resolve the error, what you need to do is to check the WiFi connection. If required, then reset it. Well, this is not a difficult task. Here are the steps that you should follow:
In the beginning, you need to navigate to the Settings option. After that, you should tap on the Connection button.
Thereafter, you have to check whether the WiFi connection is okay or not. Next, you should click on the Forget Network button to get a new network.
Now, it will ask you for the registration email. So, enter your email address. After that, it will send you a new password.
If you successfully performed all the above steps, then resetting the Wifi connection is completed. Then, what you need to do is to restart your machine as well as your system.
Next, check if the issue has been solved or not. If unfortunately not, then have a look at the next solution.
Solution 4 – Use the Static IP
As we mentioned earlier that sometimes due to the IP conflict, the authentication error might irritate you. You can easily resolve it by changing the wireless settings of your device. Here’s how to do it.
At first, you have to go to the Settings option of your device. Thereafter, select the ‘modify network config’ from the available options.
Then, you should mark the dialog box which is located beside the Advanced button. Then, navigate to the IP settings.
Now, you have to change the option from DHCP to Static. After that, an IP address will pop up on the screen. You should note down the static IP address and then enter it. Then, click on the Save button. In case, you are not sure about the IP address, then we suggest you to contact your service provider.
Hopelly, this solution work for you. However, if you still dealing with the Linksys Authentication Error, then simply proceed to the next solution.
Solution 5 – Enable and Disable the Flight Mode
If any problem occurs with the network signal, then as a result you might face this Linksys error. So, in that case, you have to check the Airplane mode option on your device. Next, you should wait for at least one to two minutes, then again turn it on. To do this, you have to again tap on the Airplane mode.
Once, you have successfully disable it, then try to connect your Linksys router with the internet. If it connects, then your job was over. Otherwise move to the next solution.
Solution 6 – Perform Network Settings
This is another alternative solution for you. To perform this task, you first, navigate to the Settings option and click on the Backup & Reset button. Now, a new page will appear on the display. From there, you have to scroll down below and click on the ‘Network Setting Reset’ option.
Then, you have to click on the Reset Settings option. Once successfully done, then you can go back to the WiFi menu and try to connect your router with the internet.
[Note:- while performing the task, you can lose your important data and files. So it is always a good option to keep a backup of your important files]
Solution 7 – Factory Reset your Device
So, you tried everything and you fail each time, then we suggest you to Factory Reset your android device to fix the error.
If you perform a factory reset, then you can also get rid of network settings, Android app issue
Which can be a possible reason for the Linksys Authentication Error. Before applying this solution on your computer, just make sure that your data and files are safe. Then, look at the below given portion.
- At first, you should go to the Menu section of your Android device. From there, navigate to the Settings part.
- Within the Settings you can see a lot of options. You should scroll down and click on Backup & Reset .Next, click on the Factory data reset.
- Wait until the procedure is completed. After that, reboot your system and now your Linksys router will surely connected with the internet.
That’s it. We wrap the discussion. Hope with the help of the above eight solutions, you can fix the Linksys Authentication Error. However, if you still have doubts, that you are not able to apply those solutions on your own, then be on the safe side and take expert help.