Windows Updates are very important for your computer. Microsoft regularly releases updates in order to improve the system’s performance. Additionally, these Windows Update help to fix certain errors. So, it is recommended to update your Windows Operating System every time. But in some cases, while updating the Windows Operating System, you are likely to get the error 0x80070490. This Windows Update error code can pop up any time when you are in the middle of the process.
Therefore, if you are facing this annoying error code while updating, then you can follow this article to the end. Here in this article, you will get the methods that you can easily follow in order to resolve the issue on your own. Moreover, here we are also providing the causes and symptoms of the Windows update error code. Therefore, without any further delay, let us start with the article.
Symptoms of the Windows Update error 0x80070490 that you can Look at:
In this section of the article, you will know the symptoms that you can see when the Windows update error code occurs. Hence, you can follow up these points that are given below:
- The error 0x80070490 will appear on the system’s screen crashing the active Windows Update window.
- The Windows system will run slowly and will not respond to any user input.
- Many times, your system might freeze when this Windows Update issue will occur.
Therefore, these are some of the symptoms that you can observe while the Windows Update error code occurs. As now you know the symptoms, we will try to discuss the reasons that are responsible for the Windows Update issue to occur.
Know the Reasons that are Responsible for the Windows Update Error 0x80070490:
Now, read through this section of the article in order to gain knowledge about the causes of the Windows Update issue. In order to get the best fixing results for the issue, it is important to know the reasons behind the Windows error code. Therefore, you have a look at the points that are given below:
- An incomplete or corrupt download and installation of the Microsoft Security Essentials software can lead to the occurrence of this Windows Update error code.
- If in case the Windows Registry files that are related to the Microsoft Security Essentials are corrupted, then also you can get to see the Windows Update issue.
- A recent virus or malware infection to your system can also lead to the Windows error. The virus attack may corrupt the System Registry files of the Microsoft Security Essentials.
- Some of the services of the Windows Update may be disabled leading to the Windows error.
- Any third-party antivirus that is conflicting with the Windows Update servers can also cause the Windows error code.
Therefore, these were some of the reasons for the Windows error code. However, there can be many more reasons that can be responsible for the Windows Update issue. Now, it’s time to discuss the solutions that will help you to resolve the Windows Update error code. Therefore, you can immediately move forward to the next section of the article below.
Some Technical Methods that you can Follow in order to Fix Windows Update Error 0x80070490:
Here you can continue reading this section of the article, in order to know the fixing methods of the Windows issue. We advise you to follow all the steps in a serial manner to get the most efficient fixing result. Hence, you can have a look at the methods that are given below:
Method 1: Run the Windows Update Troubleshooter Tool
You can try to fix this Windows Update issue simply by using the Windows Update Troubleshooter tool. This Windows Update Troubleshooter tool is an inbuilt tool by Microsoft that resolve many of the Windows errors. If in case you do not know how to use this Windows Update Troubleshooter tool, then you can take the help of this guide. Therefore, you can follow the steps that are given below:
- In the first step, you have to go to the Settings app of the Windows Operating System. Now, when the Settings app opens, you have to head over to the Update & Security section.
- In the next step, click on the Troubleshoot option from the list of options on the left pane.
- Now, find the Windows Update option from the list. On finding the Windows Update option, you have to click on the Run the Troubleshooter button.
- In the next step, follow all the on-screen instructions to complete the Troubleshooting process.
- After that, you have to restart your system and then check if the Windows Update error still persists or not.
So this is how you can run the Windows Update Troubleshooter in order to fix the Windows Update issue easily. We hope that you are able to fix the issue. However, if in case, you are still facing the Windows error, then don’t worry. You can follow the next fixing method below.
Method 2: Run the DISM Command to Fix Windows Issue
Here, you can try to use the DISM command in order to fix the Windows Update issue on your own. The DISM is the Deployment Image & Servicing Management that also acts another troubleshooting tool for Windows 10. However, if you want to know the steps of performing this method, then you can follow the steps that are described below:
- First of all, you have to open the Start menu and type cmd in the search bar.
- Now, from the list of results, you have to find and right-click on the Command Prompt option. After that, click on it. This action will open up the black Command Prompt window.
- Now, inside the black Command Prompt window, you have to type the following command in the command line: DISM.exe /Online /Cleanup-image /Restorehealth.
- In the next step, you have to hit the Enter key from your keyboard.
Continuation of Method 2:
- However, if in case, the DISM cannot obtain the files then you have to try using your installation USB or DVD. So after inserting the media, you have to type the following command in the command line: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess.
- Also, here you have to hit the Enter key from the keyboard.
- Make sure that you replace the C:RepairSourceWindows path of your USB or DVD.
- Now, you have to close all the active windows and then you have to check if the Windows Update error code is still there or not.
So this is how you can run the DISM command in the Command Prompt in order to fix the Windows Update issue on your own. We hope that after following the above steps, you were able to fix the Windows issue easily. However, if in case, you are not able to resolve the issue, then you can follow the next method of the fixing process below.
Method 3: Delete the User ID Windows Store Cache Files from the Registry
In order to perform this method, you need the help of the Windows Registry Editor. You can then use the Windows Registry Editor in order to delete the User ID Windows Store cache files. However, if in case, you are not able to perform this method, then don’t worry. You can follow the steps that are given below:
- In the first step, you have to open the Windows Registry Editor. In order to open the Windows Registry Editor, you have to press and hold down the Windows logo key and the R key from the keyboard at the same time.
- This action will invoke the Run dialog box. Now, type regedit in the command box of the Run dialog box.
- In the next step, you have to click on the Ok button to open the Windows Registry Editor.
- Now, as the Windows Registry Editor window opens, you have to navigate to the following key in the left pane: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionAppxAppxAllUserStore.
Continuation of Method 3:
- Now, you will get a list of keys in the new window. After getting the keys, you have to select all by pressing the CTRL key and the A key from the keyboard at the same time.
- After selecting all the keys, you have to right-click on it and then click on the Delete option from the pop-up list of options.
- Now, after deleting all the keys, you have to close the Windows Registry Editor and then you have to restart your system.
- Once the system restarts, you have to check if the Windows Update issue is gone or not.
Therefore, these are steps that you can follow in order to delete the user ID Windows Store cache files. Thus, this will ultimately help you to resolve the Windows error code easily. Hopefully, now these above steps have helped you to fix the Windows issue easily. However, if you are still struggling with the Windows update error 0x80070490, then follow the next section of this article in order to fix this Windows error code in an instant.
Method 4: Check if the BITS, Cryptographic, MSI Installer, and the Windows Update Services are Running or Not
In this method, you will get the steps in order to check if all the above services are working or not. Therefore, you can follow the next section of the method in order to know the steps:
- Again you have to open the Run dialog box by using the Windows logo key and the R key form your keyboard at the same time.
- Now, when the Run dialog box opens, type services.msc in the command box. After that, you have to click on the OK button to continue.
- This action will open up the Windows Services window.
- In the next step, you have to find the following services from the list: BITS, Cryptographic, MSI Installer, and the Windows Update Services.
- On finding these services, you have to make sure that all these services are running.
- If in case, any one of the services is not running, then you have to select the service and click on the Start option. Now, the service will start to run.
- Next, you have to close the Windows Services window and then check if the Windows Update error code is there or not.
So, this is how you can start the Windows services in order to fix the Windows Update error code. However, if you want to know more fixing methods of the Windows issue, then you can have a look at the next section of the article below.
Method 5: Delete or Rename the SoftwareDistribution Folder of your Windows System
The Software Distribution folder of the Windows system is a folder that stores all the updated data of the Windows Update process. So if in case, something inside this folder gets corrupted, then you can face the Windows Update error. Therefore, you need to delete or rename this folder right away. However, if you don’t know the steps of this process, then you can take our help. You can follow the steps that are provided below:
- Before starting off the process, you need to first disable the Windows Update service. So at first, you have to type services.msc in the search bar of the Start menu.
- In the next step, you have to select the Windows Services option in order to open the Windows Services window.
- Now, when the Windows Services window opens, you have to search for the Windows Update option from the Services list.
- On finding the option, you have to right-click on it. Then, you have to select the Properties option from the popup list of options.
- After that, you have to choose the Disable option and then you have to reboot your system.
- When the system restarts, now you have to delete or rename the SoftwareDistribution folder from the system.
- Then, you have to navigate to the C: Windows path and then find the Software Distribution folder from the list.
- On finding the folder, you have to rename the folder to SoftwareDistribution.OLD. Else, you can also delete the folder by right-clicking on it and then choose the Delete option from the popup list of options.
- After performing all the above steps, you need to restart your system in order to apply the changes.
Continuation of Method 5:
- Now, when the system restarts, you need to again re-enable the Windows Update Services.
- In order to do this, navigate to the Windows Services window, and then right-click on it in order to open the Properties window.
- In the next step, you have to change the state from Disabled to Manual. Now again, you need to reboot your system.
- When the system restarts, you need to check if the Windows Update error code 0x80070490 still persists or not.
After performing these steps, we hope that you were able to fix the Windows Update issue on your own. If in case, you have resolved the issue, then you are good to go. However, if the Windows Update error 0x80070490 still bothers you, then have a look at the next method.
Method 6: Try to Reset the Windows Update Components
If there are corrupted Windows Update components, then you can get the Windows update error 0x80070490 easily. Therefore, you have to reset the Windows Update components at the earliest. Hence, you can follow the steps that are given below:
- In the first step, you need to press the Windows logo key form the keyboard. This will open up the Start menu. Now, you have to type cmd in the search box of the Start menu.
- From the list of results, you should find and right-click on the Command Prompt option.
- Now, form the pop-up list of options, you have to select the Run as Administrator option.
- This action will invoke the black Command Prompt window to appear on your screen.
- Once the black Command Prompt window opens, you have to type the following commands in the command line:
-
- First Command is: net stop bits
- Second Command is: net stop wuauserv
- Third Command is: net stop appidsvc
- Fourth Command is: net stop cryptsvc
- Also, remember to press the Enter key form the keyboard after each command.
- After this, you have to type the following command in the command line of the black Command Prompt window:
- Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
- Ren %systemroot%\system32\catroot2 catroot2.old
- Here, also you have to hit the Enter key from the keyboard after each command.
Continuation of Method 6:
- Now, you have to again type the following commands in the command line of the Command Prompt window:
-
- First Command is: net start bits
- Second Command is: net start wuauserv
- Third Command is: net start appidsvc
- Fourth Command is: net start cryptsvc
- Next, you have to hit the Enter key from the keyboard after each command.
- Finally, you have to close the Command Prompt window and then you have to reboot your system.
- Once the system reboots, you have to check for the Windows Update error code if it occurs or not.
So this is how you can reset the Windows Update components in order to fix the Windows update issue. Hopefully, now you have successfully resolved the error 0x80070490 on your own.
Final Words of this Article
To conclude, these were some of the methods that you can easily try out in order to fix the Windows error 0x80070490 on your own. Also, these methods are tried and tested by many users providing the best fixing results. Hopefully, you will not face the Windows Update issue again after performing these fixing methods. However, if in case, you face any problem then you can get back to us. You can take the help of the comments section below in order to get back to us for further reference.