If PFN_list_corrupt Bothers You Much: Get The Full Guidance

The PFN_LIST_CORRUPT Blue Screen of Death issue mainly occurs whenever the Page Frame Number (PFN) is unable to process its tasks due to a glitch. The PFN is mainly used by the hard drive of your system in order to determine the location of each file on the physical disk. A BSOD generally happens when your system can’t able to process a file. Hence, in case if you are in search of this PFN_list_corrupt issue to get fixed, then you can end your search here.

Here, in this article, you will get the methods of fixing this PFN_list_corrupt BSOD issue on your own. Moreover, in this article, we are also discussing the symptoms and the reasons for the PFN issue to occur. Hence, you can straight away move to the next section of the article without wasting any more of your time.

Some of the Common Alerts of the PFN_list_corrupt BSOD Error that You can Easily Notice

Follow this section of the article in order to know the indications of this Blue Screen of Death error. For better understanding of the solutions, you need to know the symptoms. Hence, you can have a look at the points that are given down below:

  1. When the PFN issue occurs you will get a message saying PFN_list_corrupt on your system’s screen.
  2. Also when the issue occurs, it crashes any active program at that point of time.
  3. In some cases, another error message pops up on the screen. The error message reads “A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file:”
  4. Also your system performance becomes low and your system may crash frequently.
  5. When the PFN list corrupts, it gets a value of 0x0000004E.
  6. In another case, your system sometimes freezes for a while and also responds slowly to any input.

So, these were the symptoms that you can notice when the PFN BSOD issue occurs in your system. Now, after knowing the symptoms of the error, we will now proceed to the next section of the article below.

Get the possible reasons that are responsible for this PFN_list_corrupt issue to occur

Here in this section of this error fixing article, you will get the reasons that are responsible for the PFN issue to occur. Moreover, its is important to know the reason any issue before starting to perform the fixing methods. Therefore, you can follow the points that are given down below:

  1. The most common reason for the PFN issue to occur is due to the incorrectly configured or out of date device drivers of the system.
  2. If in case, the Windows System Registry files are corrupted due to a virus attack, then also you can get the PFN_list_corrupt issue.
  3. Also, if ion case, any third-party software is conflicting with the device drivers then you can easily face the PFN error on the system.
  4. In another case, if you are using a corrupt or faulty hard disk drive on your system, then also you can receive the PFN BSOD issue.
  5. Also, the PFN can get corrupted if you are using a corrupt or faulty RAM on your system.
  6. If in case the new Windows 10 Operating System files are incompatible with that of the hardware, then also you can get the PFN BSOD issue.

Therefore, these are some of the reasons why the PFN_list_corrupt error occurs. However, there can be reasons that are responsible for this PFN issue. Now, we will try to discuss some of the top methods that will help you to fix this Blue Screen of Death issue. Hence, you can proceed to the next section of the article below.

Get Hold of These Top Methods in order to Fix the PFN_list_corrupt Windows 10 issue

In the next section of this error fixing article, we are going to teach you to use these top methods in order to fix the PFN issue on your own. We suggest you that you follow all the steps without skipping any of them. Therefore, with no further delay let us discuss some of the methods that are given down below:

Method 1: First, try to run the inbuilt Blue Screen of Death Troubleshooter tool of the Windows Operating System

Here in this method, you will learn how to use the Windows Troubleshooter tool in order to resolve the PFN issue. The inbuilt Windows Troubleshooter is a system tool that comes along with the Windows Operating System. This powerful tool helps you to fix any issue no matter how big or small it is. Hence, you can try out this Windows Troubleshooter tool in order to fix the BSOD PFN_list_corrupt issue. However, if in case you are not familiar with the process, then you can take our help. Here, you can proceed to know the steps of the method that are given down below:

  • In the first step, you have to open the Start menu by clicking on the Windows logo icon on the left of the taskbar.
  • Once the Start menu opens, you have to type Settings in the search bar. After that, you have to choose the Settings option from the results.
  • As the Settings app window opens, you have to click on the Update & Security option from the list of options.
  • In the new window, you have to select the Troubleshoot option from the left pane.
  • After that, you have to choose the Blue Screen of Death option from the list on the right pane.

Steps of Method 1 Continued

  • In the next step, you have to click on the Run the Troubleshooter button. After that, you have to follow any on-screen prompts in order to complete the Blue Screen of Death Troubleshooting process. Also, you have to wait for the process to complete its task.
  • When the task finishes, you have to reboot your system.
  • Finally, when the system reboots, you have to check if the PFN_list_corrupt Blue Screen of Death issue is still there or not.

Hence, these are the steps that will help you to run the Blue Screen of Death Windows Troubleshooter tool. Thus, helping you to fix the PFN issue easily. We expect that now you are able to fix the PFN error on your own. However, in case, you are still getting the Blue Screen of Death issue, then don’t panic. In the next section, we have discussed another method that you can easily follow up.

Method 2: Now Check whether the System Hard Disk Drive is Corrupt or Not

As said earlier, using a corrupt system hard disk drive an invite the PFN BSOD error in your system. Hence, you have to check for the system hard disk drive. In order to do this, you need to run the chkdsk command on your system. This command basically scan the hard disk drive for errors and if found will resolve them on its own. However, if in case you do not know how to run the chkdsk command then we will teach you how to run the command. Therefore, you can follow up the steps that are given down below:

  • First of all, you have to enter the Advanced Setup part of your system. In order to perform this, you have to restart your system and then you have to hold the Shift key when your system starts to boot.
  • In the next step, you have to choose the Troubleshoot option. After that, you have to select the Advanced Options link.
  • Now you have to select the Command Prompt option from the list of options.
  • When the Command Prompt window opens, you have to type the following commands in the command line:
    • First Command is: bootrec.exe /rebuildbcd
    • Second Command is: bootrec.exe /fixmbr
    • Third Command is: bootrec.exe /fixboot
  • Also, remember that you have to hit the Enter key from the keyboard after typing each command in the command line of the Command Prompt window.

Steps of Method 2 Continued

  • Now, you have to wait for the command to be executed. As the command execution finishes, you have to type other commands in the command line of the Command Prompt window. Therefore, the command is: chkdsk /r {hard disk drive letter}. Here, you have to type the letter of the hard disk drive without the brackets that you want to check.
  • In the next step, you have to hit the Enter key from the keyboard. Now you have to reboot your system.
  • Finally, when the system reboots, you have to check if the PFN corruption issue is resolved or not.

Hence, this is how you can use the chkdsk command in order to resolve the BSOD PFN_list_corrupt issue easily. Hopefully, now you are able to remove the Blue Screen of Death issue on your own. However, if you are not able to fix the PFN BSOD issue, then you can follow the next section of the article below.

Method 3: You Can also Try to Disable Microsoft OneDrive Software

As you know that the Microsoft OneDrive is a part of the Windows Essentials suite and it now has become the default application for cloud storage purposes. The Microsoft OneDrive is a great tool but in some cases, users report it as a source of the PFN error. Hence you can try out these methods to disable the Microsoft OneDrive on your system. However, if you are not sure of the steps of the process, then we will provide you the steps. Therefore, you can follow up the steps that are given down below:

  • Firstly, you have to press and hold down the Windows logo key and the S key at the same time by using your system’s keyboard.
  • Now, you have to type group policy in the search bar of the Start menu. After that, you have to slwect5 the Edit group policy option from the results.
  • Now, the Local Group Policy Editor window will open on your system’s screen.
  • In the next step, you have to select the Local Computer Policy option from the left pane of the window.
  • After that, you have to navigate to the Computer Configuration section and then you have to click on the Administrative Templates option.
  • Next, you have to choose the Windows Components options and after that, you have to select the OneDrive option.
  • In the new window, you have to locate Prevent the usage of OneDrive for file storage option in the right5 pane. After finding the option, you have to double-click on it.
  • In the next step, you have type select the Enabled button.
  • Now in order to apply the changes, you have to click on the Apply button. After that, you have to click on the OK button in order to disable the Microsoft OneDrive application.

Alternative Process

If in case, the above process provides no result, then you can disable the Microsoft OneDrive application with an alternative process. Here you can use the Registry Editor in order to disable the Microsoft OneDrive application. Hence, you can follow the steps that are given down below:

  • In the first step, you have to press and hold down the Windows logo key and the R key together using your system’s keyboard. This action will open up the Run dialog box on your system’s screen.
  • After that, you have to type regedit in the command box of the Run dialog box. Now you have to click on the OK button at the bottom in order to continue.
  • Now the Registry Editor window will open up on your system’s screen.
  • Once inside the Registry Editor window, you will have to navigate to the following key in the left pane. Therefore, the path is HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftWindows
  • In the next step, you have to expand the Windows key and then you have to search for the Microsoft OneDrive key. After finding the Microsoft OneDrive key you will have to select it.
Step of the Process Continued
  • After that, you have to right-click on the right pane of the window. From the popup result, you will have to select the New option.
  • After that, you will have to click on the DWORD 932-bit) Value option from the popup list of options.
  • Now, you have to enter DisableFileSyncNGSC as the name of the new DWORD.
  • In the next step, you have to double-click on the DisableFileSyncNGSC option and then you have to change its Value data to 1.
  • Finally, you have to click on the OK button in order to save the change. After that, you have to close all the active windows and then you have to reboot your system right away.
  • As the system reboots, you have to check if the BSOD PFN_list_corrupt error is gone or not.

Therefore, this is how you can disable the Microsoft OneDrive application helping to fix the BSOD PFN issue. Here in this method, we have provided two different approaches to disable the Microsoft OneDrive application. Now, we expect that you are able to fix the issue on your own. However, if in case you want to know other fixing methods for the PFN error, then we will guide you. Hence, you can have a look at the next section of the article below.

Method 4: You Can also Try to Check if the RAM is Faulty or Not

The  Random Access Memory is another form of your system storage. Any issue or glitch in the Random Access Memory (RAM) can lead to the occurrence of the PFN_list_corrupt error. Hence you need to check if the RAM is faulty or not. If in case, you are not aware of the checking process, then don’t panic. You can follow the steps of the RAM checking process that is given down below:

  • In the first step, you have to press and hold the Windows logo key and the R key together using your keyboard. You have to perform this action just like in the previous method.
  • Now, the Run dialog box window will open on your system’s screen. After that, you have to type mdsched.exe in the command box of the Run dialog box.
  • In the next step, you have to click on the OK button in order to continue.

Steps of method 4 continued

  • Now, you will notice that the Windows Memory Diagnostic window will appear on your system;’s screen.
  • Inside the Windows Memory Diagnostic window, you will get options. Here you have to click on the first option which is Restart now and check for problems option.
  • Now, the Windows Memory Diagnostics Tool window will pop up on your screen’s screen. Once this window appears, the RAM issue checking process kicks off.
  • Now, you have to wait for a while so that the process finishes its task.
  • As the task gets complete, you have to reboot your system. Once the system reboots, you have to check for the BSOD PFN error if it occurs again or not.

Hence, these are the steps that you can easily follow in order to check for the faulty RAM. Hopefully, now after performing these steps above, you are able to fix the PFN Blue Screen of Death issue on your own. However, if you want to learn more fixing methods, then you can proceed to the next section of the article below.

Method 5: Try to run the DISM tool in order to fix the PFN error

The Deployment Image Servicing and Management (DSIM) tool helps to re-deploy the system image. Hence helping you to resolve any issue on the Windows Operating System platform. Therefore, you can try out the DISM tool to fix the PFN error. Hence, you can follow the steps of the process that are given down below:

  • At first, you have to right-click on the Windows logo menu and then you have to select the Command Prompt (Admin) option from the popup list of options.
  • Once the Command Prompt window opens, you have to type DISM /Online /Cleanup-Image /RestoreHealth command in the command line.
  • In the next step, you have to hit the Enter key from the keyword and then you have to wait for the process to finish its tasks.
  • After that, you have to restart the system and check for the issue.

Alternative Process

  • In another process, you have to first insert the Windows installation media. After that, you have to again open the Command Prompt window as you have done previously.
  • Now, you have to type the following commands in the command line:
    • First Command is: dism /online /cleanup-image /scanhealth
    • Second Command is: dism /online /cleanup-image /restorehealth
    • Third Command is: DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
  • Remember that you have to press the Enter key from your keyboard after typing each command in the command line of the Command Prompt window.
  • Also, make sure that you replace the X value with that of the Windows Installation media drive letter.
  • When the command execution finishes, you have to restart your system. After that the system restarts, you have to check for the PFN BSOD issue if it still there or not.

Therefore, these are the steps that you can easily carry out in order to resolve the PFN corruption issue. Hopefully, we expect that now you are able to resolve the PFN issue on your own.

Some of the Ending Words of This Article…

So here we are at the end of this PFN error fixing article. Hence, the above given methods have the top-notch steps that can easily resolve the PFN_list_corrupt issue on your own. We also expect that these methods will not pop up any other issue while you perform the steps. If in case, you do face any other issue in the resolving methods and steps, then feel free to get back to us. In order to get back to us, you can take the help of the comments section below.

Windows

What are the Solutions to Fix Error 0xC000012F?

Error 0xC000012F is a common issue on Windows 8 and 10 computer. This is a quite annoying problem for most people because the error message, “ Origin.exe – Bad Image C:\WINDOWS\SYSTEM32\MSVCR120.dll is either not designed to run on Windows, or it contains an error. Try installing the program again using the original installation media or […]

Read More
Windows

Resolve Windows Update Error 80072efe with Excellent and Workable Hacks

Windows is used for both offices as well as domestic purposes. At the same time, users face lots of issues while working with this. Windows update error 80072efe is one of the error code that is very common in the occurrence and encountered by a huge number of users as well. This particular error code […]

Read More
Your-Windows-License-Will-Expire-Soon-On-Windows-10
Windows

Your Windows License Will Expire Soon On Windows 10 [Easy Hacks]

Nowadays, it has become easier to install Windows 10 by buying the official OS. Also, you can get the update at ZERO cost as you can download the firmware from Microsoft Store or from Microsoft’s server on the device by using the product key.  But, while installing Windows 10, if you encounter the error notification […]

Read More