Error code 0x80080008 is quite common and irritating. Most of the time, you might encounter this error code on your device, when you are trying to update any application. Sometimes, if some of the updated files are not successfully downloaded, then this issue arise on your system. Once, this error code appears on your device, then the updating process will fail.
However, you can easily troubleshoot this error. But, you should follow proper guidance.
Therefore, if you ever face this error and want to fix it immediately, then you have just arrived at the right article. Go through the passage, here, we are going to discuss some easy and practical techniques which will surely help you to resolve the problem instantly.
Probable Causes for Error Code 0x80080008
If you encounter the Windows update error 0x80080008 for the first time on the system, then you must gather all the information about it, such as why this error code pops up on the screen and what can be the fixing technique, and so on. Here for your help, we have highlighted some of the top-rated causes which are responsible for the appearance of error 0x80080008 on your device. Check them out:
- Most of the time if an application is not successfully updated, then you might see this error code on your device.
- In case, you have a weak internet connection, then also this issue can irritate you.
- Sometimes, corrupt system files can be responsible for this error code.
These are some of the common reasons, now have a look at the symptoms that are triggered by this error code.
Once this error code attacks your computer, then you might face a lot of difficulties such as:
- Error code 0x80080008 message continuously popping up on the screen.
- Windows will slowly response to the mouse and keyboard inputs.
- All the active applications will stop immediately.
Now, keep an eye on the feasible solutions to eliminate all technical glitches.
Resolve Error code 0x80080008 with 8 Amazing Solutions
There are several ways that you can try to fix this Windows update error. Here, we have listed some of the top rated solutions for you, keep reading.
Solution 1- Check the Internet Connection
This is the first solution that you should try before going to further towards complicated solutions. At first, you have to make sure that you have a strong internet connection. For that what you need to do is to simply play a video and if the video play normally, then everything is fine. In case, it keeps buffering, then we suggest you switch to a new connection that offers you better network speed than this one.
So do the needful, and after that check if the issue has been solved or not. If not, then move to the next one.
Solution 2- Disable the Antivirus
Some users noticed that during the update process if your security software, as well as any other third-party software, is running on the background, then also you might face this error code. In your case, if this is the reason, then we advise you to disable the antivirus programs and see if the error code is gone or not. If not, then you might need to uninstall all the third-party security software
Solution 3- Perform SFC Scan
This is one of the easiest solutions to fix this issue. To apply this procedure, you need to go through the undermentioned steps.
In the beginning, you need to press the Windows+S keys on your keyboard. After that, you should type ‘command prompt’ within the search field and hit the Enter button.
Next, you should right-click on it and select the Run As Administrator. Thereafter, a new page will open. Here, you need to type ‘sfc/scannow’ within the given field and then press the Enter button.
After that, the scanning process will start. It will find and remove the corrupted files. The procedure might take some time. You should wait until the scanning procedure is complete. Once done, then reboot your Windows device and if you fail to fix the error code 0x80080008 this time as well, then here is another effective solution for you.
Solution 4- Restart the BITS Services
So, you have tried all the above three solutions and none of them brings the required result for you. Don’t worry, you can restart the BITS services to troubleshoot the error code. This is not a challenging task, here is how to apply this solution on your computer.
- At first, you have to launch the Run dialogue box. For that, press the Windows + R keys simultaneously on your keyboard and after that press the Enter button.
- Once the Run dialogue box opens, then you need to type ‘services.msc’ within the required field and hit the OK button.
- It will lead you to a new page. From there you should scroll down until you see the Background Intelligent Transfer Service (BITS) option. Once you find it, then double click on it.
- In case, the service is set to Stop, then you have to click on the Start button.
- Next, navigate to the Recovery tab and ensure that the First and Second Failure is set to restart the service.
- After that, follow the online instructions and click on the OK button to incorporate the changes.
Wait until the restarting process gets complete. Once done, verify the existence of this error code.
Solution 5- Boot into the Safe Mode
If all of the above solutions fail, then we advise you to try to turn On your device into the Safe Mode. Several users noticed that this solution really works for them. So, you should open your computer into Safe Mode and try to fix the issue. Here are the steps that you should follow to apply this procedure on your machine.
At first, you should press the Windows + R keys together on your keyboard and then hit the Enter button. Now, the Run dialogue box will pop up on the display. Within the Run dialogue box, you need to type ‘msconfig’ and after that click on the OK button.
Next, you should navigate to the Service tab and check the dialogue box which is present beside the ‘Hide all Microsoft services’ option. After that, you have to click on the Disable All button and after following the online instructions click on the Apply button.
Now, navigate to the Startup tab and select the Task Manager from the available options. Thereafter, you need to disable all the Startup Programmes individually.
Once done, then reboot your machine and now this error code will not appear on the display any more.
Solution 6- Restart the Windows Update Components
According to some users, due to the Windows update components, you might see the error code 0x80080008 on the system. In order to resolve the issue, you need to restart the Windows Update Component. Well, you can easily do it manually, however, we suggest you use the Command Prompt. Follow the steps to know how to apply this solution with the help of the Command Prompt:
At first, you should go to the Start Menu and type ‘cmd’ within the search field. Then, you need to right click on the CMD and select Run As Administrator. Next, you have to enter the following command and press the Enter key after every command.
- sc queryex wuauserv
- Run sc queryex wuauserv
- Write down the pid
- taskkill /f /pid What_you_have_written
- Run net start bits
- net start wuauserv
Once you have successfully executed all the commands, then restart your machine in order to update any application without this error.
Solution 7- Turn On Automatic Updates
In order to eliminate the glitch, you need to turn On the automatic updates. If you turned it On, then the latest version of the Windows update will be updated automatically. This can fix the issue. So, at first, you have to navigate to the Start menu and type ‘Windows Update’ in the search field and press the OK button.
Next, click on the Change Settings option. Now, a new page will appear on the display. From there, you should scroll and click on the Important Update option. Under this section, you need to click on the Install Updates Automatically button. After that, mark the dialogue box which is located beside the ‘Give me recommended updates the same way I receive important updates’. Thereafter, click on the OK button to take the effect of the changes.
Finally, reboot your device and check if the error code still persists on your device or not.
Solution 8- Try to Again register the Wups2.dll
Are you still dealing with the error code 0x80080008? Do not worry, here is another alternative at your rescue. In order to perform this task, you should go through the undermentioned steps.
Navigate to the Start Menu and type ‘cmd’ in the search field. Once, the Command Prompt opens then right click on it and select Run As Administrator.
Next, you should type the following command and hit the Enter key after every command:
- Starting with REGSVR32 WUPS2.DLL /S
- Then, REGSVR32 WUPS.DLL /S
- REGSVR32 WUAUENG.DLL /S
- REGSVR32 WUAPI.DLL /S
- Finally, REGSVR32 WUCLTUX.DLL /S
After that, you should restart your PC and now surely this error code will not appear on the screen.
We believe with the help of the above solutions you can quickly get rid of this error. However, all the above-mentioned methods are manual, so you need to apply them carefully.
If you think you lack enough technical knowledge, then don’t take any risks and take professional help.