Effective Ways for Outlook Safe Mode Turn Off without much Hassle

Outlook generally starts in the Safe mode which enables users to run the program with limited functionality. Though it is a popular one, due to several reasons, you can turn it off also. In case, if you are not aware of outlook safe mode turn off process, you are in the perfect page. This article consists of a step by step guidance which will help you out is the best way possible.

Fixes for Outlook Safe Mode Turn off Error:

In case, if are not aware of how to get Microsoft outlook out of safe mode, then, you can try out these methods mentioned below:

Method 1: Disable Add-ins In Safe Mode

If you want to perform outlook safe mode turn off then, at first, you have to disable add-ins in safe mode using these steps:

  1. At first, you have to be sure about that, the Outlook is in the Safe mode. In this case,you have to check whether the icon in your taskbar contains an exclamation mark.
  2. After that, you have to extend the File tab as well as you have to tap on the Options.
  3. Once done, you have to tap on the Add ins tab. From that place, you have to navigate to the drop down menu which is situated next to the Manage option.
  4. Now, you have to choose the COM Add-ins from that list. Once done, you have to tap on the Go to proceed section.
  5. In this point, you have to take a screenshot of the add-ins list as well as you have to save it in the place as per your convenience. It will help you to restore the normal configuration of your Outlook. In case, any malfunctions occur after you disable the Addins.
  6. Now, you have to disable each of the entries as well as hit OK to continue.
  7. After that, you have to close the Outlook as well as you have to open it back again. In case, if you noticed that, the program boots up in the normal mode. You will be able to see the issue will be resolved.
  8. Now, you have to return to the file as well as go to the option.
  9. After that, locate the add ins and enable and disable each of them systematically, one by one, until you get the conflicting one.
  10. Now, you have to choose it as well as hit the Remove button to continue.

Once done, you have to restart the Outlook and check whether it boots up in normal mode or not.

In case, if you won’t be able to resolve this matter, then try out these steps.

Method 2: Restore Your Computer Using System Restore

System restore is a process which allows users to go back their computer state to the previous point of time. To perform this action, you should try out these steps :

  1. At first, you have to hold the Windows key and the R key at the same time to launch the Run dialogue box.
  2. Here, you have to type rstrui.exe as well as you have to click on the Ok button to continue.
  3. Now, in the system restore window, you have to pick a different restore point as well as hit Next to continue.
  4. Go to the Next section to show more restore points.  
  5. Now, you have to locate a point when the Outlook was working then, you have to select that restore point as well as you have to proceed with the instructions situated in the screen to restore the computer to an earlier time.
  6. Once you are able to complete the task, the system will start restoring. After the restoring process has finished, you have to check whether the Outlook works fine or not. If you won’t be able to resolve the matter, you need to follow the next method.

Method 3: Restore the Previous Version of Outlook

You can also restore the previous version of Outlook, in order to resolve the matter on your own. Now, try to check the status of error.

  1. At first, you have to click on the start button and type the Outlook.exe in the search dialogue box.
  2. Now, you have to place a right click on it and choose properties.
  3. Now, you have to go to the Previous Versions tab, as well as locate the Outlook.exe file, it will have a date when it worked. Once done, you have to tap on the Ok option to see whether it works or not.
  4. Now, you have to perform the same for all of the versions listed there. Once done, you have to Open/Close the application until you see that your application is opening without safe mode.
  5. In case, this procedure works for you, then you have to keep the Window open.
  6. Now, be sure about that, now you are running a version of Outlook which is without safe mode from one of the previous versions. After that, you have to hold down the Windows key and the R key at the same time to launch the Run dialogue box.
  7. Here, you have to type taskmgr as well as you have to tap on the OK option.
  8. After that, in the Task Manager Window, you have to navigate to the Process Tab. Now, you have to locate the Outlook.exe. Once done, you have to place a right click on it as well as you have to select the Open File Location.
  9. Now, you have to copy all of the files from the next window, after that, you have to navigate to the  C:\Program Files (x86)\Microsoft Office\Office.
  10. Here, you have to paste the previously copied file.
  11. Now, you have to reopen the Outlook and check whether it starts in the normal mode or not. In case, if you won’t be able to resolve this matter, then try to follow the alternative method.

Method 4: Uninstall the KB3114409 Update

You can also uninstall the KB3114409 Update, in order to eliminate the safe mode. In that case, try to follow the steps mentioned below.

  1. At first, you have to close the Outlook completely.
  2. Once done, you have to open the control panel as well as you have to tap on  Uninstall a program option.
  3. Once you become able to navigate to the Programs and Features window, you have to tap on the View installed updates option.
  4. Now, you have to use the search installed updates search bar, which is situated in the top right corner in order to search for the bad update ( KB3114409 ).

After that, once you are able to manage the identity of the bad update, you have to tap on the Uninstall button as well as you have to follow the confirmation prompts. Again, restart your PC and see whether you are successful to complete the task or not.

Method 5: Perform Outlook profile reset

You can also perform an Outlook profile reset in order to resolve this issue. In that case, you should try to follow these steps:

  1. At first, you have to go to the control panel. Now, navigate to the Mail section.
  2. After that, you have to tap on the Mail option as well as you have to tap on the Show Profiles option.
  3. Once done, you need to create a new profile. In this case, you have to tap on the Add button. Now, you have to provide the name and on the OK button to continue.
  4. Once done, you have to return to the Mail window as well as be sure about that, the profile which you have created is being used by default.
  5. Once done, you have to tap on the Apply button in order to complete the selection process.
  6. After that, you have to start the Outlook one again and check whether it starts without safe mode or not. In case, if you won’t be able to resolve the matter, then you can follow the alternative method.

Method 6: Check PST File

You can also check for the PST files in order to resolve this issue without any hassle. In that case, try out these steps:

  1. Ay first, you need to close the Outlook completely  as well as you have to navigate to the C:\ Program Files or C:\ Program Files (x86), as per the version which you are using.
  2. Once done, you have to use the search box which is situated in the top-right corner in order to search for the SCANPST.exe.
  3. In that case, take note that, if you won’t be able to manage the executable file via the search bar, then you have to go to the exact location. In this case, you can use this list as per various Outlook versions.

 2016: C:\Program Files (x86)\Microsoft Office\root\Office16

 2013: C:\Program Files (x86)\Microsoft Office\Office15

 2010: C:\Program Files (x86)\Microsoft Office\Office14

 2007: C:\Program Files (x86)\Microsoft Office\Office12

  1. Once done, you have to open the SCANPST.exe as well as you have to set the path of the PST file using the browse button, where you want to store the file. By default you will be able to see the PST files are stored in the Documents\Outlook Files.
  2. Now, you have to tap on the start button to begin the scanning process.
  3. After the scanning process, if you become able to see the inconvenience then you have to tap on the Repair button in order to resolve this issue.
  4. Once you are able to see the repair process, you have to restart Outlook and check if you are able to resolve this matter or not. If not, then, you have to follow the next method mentioned below.

Method 7: Run /resetnavpane command

 

In order to start Outlook without Safe mode, you have to follow these steps mentioned below.

  1. At first, you have to close the Outlook completely.
  2. After that, you have to navigate to the start button as well as you have to access the Run application.
  3. Once done, you have to type the Outlook.exe /resetnavpane in this box and tap on the Ok button.
  4. In that case, take note that, if you click on the OK button then the customization of the navigation panel will be lost.
  5. After that, Outlook will be started in the normal mode.

In case, if you won’t be able to resolve this matter, then try out these alternative steps.

Method 8: Disable Compatibility Mode

You can also disable the compatibility mode in order to resolve this matter. In that case, try to follow these steps:

  1. At first, you have to close Outlook as well as you have to go to the Outlook.exe on your computer. The exact path will differ as per your Outlook version. Here is a list of exact paths:

2016 – C:\Program Files (x86)\Microsoft Office\root\Office16

2013 – C:\Program Files (x86)\Microsoft Office\Office 15

2010 – C:\Program Files (x86)\Microsoft Office\Office 14

2007: C:\Program Files (x86)\Microsoft Office\Office12

  1. Once done, you have to place a right click on the Outlook.exe as well as you have to tap on the Properties section.
  2. After that, you have to tap on the compatibility tab and be sure about that, the box is directly under the Compatibility Mode has been unchecked.
  3. Now, you have to tap on the Apply button to confirm the selection process.
  4. After that, you have to open the same Outlook executable and check whether you become able to start the Outlook in normal mode or not.

In case, if you won’t be able to perform this task, then you have to follow the alternative method.

Method 9: Reset safe Mode Registry Key

You can also reset the Safe mode registry key to run the Outlook without safe mode. In that case, try out these steps:

  1. At first, you have to go to the start button and navigate to the Run dialogue box.
  2. Once done, you have to search for the regedit as well as you have to tap on the OK button.
  3. After that, you have to navigate your way using HKEY_CURRENT_USER\ Software\ Microsoft\ Office.
  4. After performing all of these steps, as per the outlook version you are using, you may take different folders.
  5. Name the folder as DisableSafeMode as well as hit the Enter button to confirm.
  6. Now, you have to place a right click in the DisableSafeMode and tap on the modify button.
  7. Insert the value 1 in the Value data box as well as a tap on the Ok button to continue.
  8. Now, you have to Quit the Registry Editor as well as you have to reboot your computer.
  9. Now, start the Outlook and check whether you are able to start Outlook in safe mode or not.

To Conclude

In this knowledge-based article, experts have provided complete guidance to resolve this issue without any hassle. In this case, if you encounter any kind of glitches while performing these steps then you can leave a comment in the comment section as feedback. On that note, we are concluding this post and see you in the next one.

Maria Colombo
Maria Colombo
Articles: 1190