Belkin range extenders surely work in a great way to ease the pain of connecting device to its network. However, it is quite troublesome to carry out the specific steps. Here is a detailed tutorial on “How to set up or reset the Belkin range extender?” To start with, find the reset button present on either side of the device and keep it pressed for about 40 seconds. If the light changes, then you will know that it is certainly done. Check if the light is changed to a solid blue color from a light green color. If it works, it will display a new SSID named as Belkin.setup.
If it appears on the WiFi section, attempt to connect it to the network. Open the browser and go to Belkin.range. In case, if you are not able to access the same, loom for the properties and scroll down the section to look for the setup option. Upon the bottom line, you will find the DNS address “192.168.0.1”. You can also type in the address in the address bar and it will open up the homepage.
After you get the access to the settings page, check if the page is readily available for you to make the desired changes. Most of the times it may also create a bit of issue. Hence, it is critical to find the required assistance that will make you get the required assistance to troubleshoot the issue. If your Belkin range extender is still not connecting to the network, here are some other troubleshooting steps as well.
Belkin extender reset- Here’s All You Need To Do
To get through the reset option, start by searching for the SSID and connect it to the available WiFi network that is present on your network. Enter the network password and it will surely make the task easier to join into the settings page. This will check for the network credential and allow you to connect you to the desired network server that you desire to connect.
Lately, you will require to confirm your extended network before you go back down to the WiFi settings. If the settings are changed, the previous network server will disappear. Before that, you will also need to connect to your normal WiFi that seems to appear into the WiFi section as well.
In case, the server connects automatically, you will need to verify that whether you are connecting to the network via the little WiFi range extender or not. if yes, check if the network is running smooth and it should not be a bit lagging or disrupted.
How To Log Into The Netgear Home Router?
The method involves a series of steps that are quite evident to carry out if you need to log into the Netgear Home Router, For that, check for the following steps-
- Launch a web browser from a computer or mobile device. It should be connected to your router’s network.
- Go to the address bar and type http://www.routerlogin.net or http://routerlogin.com This will open up a login window.
- Enter the router username and password.
- The username should be admin. The default password is password. The username and password are case-sensitive. This also displays a BASIC Home screen page.
There can also be a number of issues that are disrupting your access into the router login page. You can also access it through the admin settings page and check if it because of any kind of browser cache. Another very common issue regarding it is the IP address. This is quite a common hassle that a lot of users basically face while accessing their Netgear router.
Check for the issues that have been a troubling factor for you and get possible help to get rid of it for one and all. The steps for Belkin setup is a bit daunting but the above solutions will surely work in your aid.