OS

How to Solve Error Code 0x80072ee7?

The users of Windows OS often face several errors with Windows Store after upgrading their Operating System to its updated version. Error code 0x80072ee7 is one of those common bugs faced by several users. When users face this error, then the search bar of the Windows Store prompts that there is no internet connection available whereas other applications such a web browser connected to the internet properly. Most of the time it is seen that it is a problem associated with the Microsoft update or Windows update. Sometimes, it also could be a problem with the DNS entries in the Hosts file.

If you face the same error, then nothing to get worried about this. Here in this article, we are going to present some easy tips and tricks which can help you to fix the Microsoft error code 0x80072ee7. Hence, you are advised to go through the article given below.

What Causes the Error Code 0x80072ee7?

There are several reasons behind the error code 0x80072ee7. Have a look at the reasons given below:

  1. Because of the virus or malware infection, you can face this issue.
  2. If there are any problems with the network configuration, then you can encounter this error.
  3. Due to the damage Windows registry, you can also meet this error.
  4. Damage system file also may be the reason behind this issue.
  5. Corrupted or faulty drivers of the system also can cause this issue.  

Now, you are aware of the causes of this issue. Now, you just need some hacks to solve this error.

Amazing Hacks to Fix the Error Code 0x80072ee7:

There is a lot of ways to fix this error. Stick to the steps given below to fix the error code 0x80072ee7.

Solution 1: Change the Server Address of DND

According to the community forums of Microsoft, by modifying the address of the DNS server you can easily fix the error code 0x80072ee7. So, that’s the process we are going to attempt as the first solution. Hence, you need to follow the steps given below:

  1. At first, move the cursor to the bottom left corner of the screen and click on the Start logo.
  2. Type ‘Control Panel’ in the search bar of the Start menu.
  3. Click on the Control Panel.
  4. Now, you have to navigate to the ‘Network and Sharing Center.’ Then, tap on the ‘Change adapter settings.’ You will see this option on the left side of the screen.  
  5. Then, you have to select the network that you are currently using. Right-click on it. Tap on the ‘Properties’ option.
  6. Scroll down the list until you find the ‘Internet protocol version 4 (TCP/IPv4).’ Again, click on the Properties Option.
  7. Now, choose the ‘Use the following DNS Server addresses’ option.
  8. Then, you have to type the values given below: DNS Server – 8.8.4.4 or DNS Server – 8.8.8.8.  
  9. After that, restart the system to save the changes.

Now, try to update the system again. If you see that the system till showing the same error, then move on the solutions given below. 

Solution 2: Run the SFC or System File Checker

System File Checker is an in-built tool of Windows that helps the users to scan the system files and to repair them. Hence, you should run the SFC to check if can fix the error code 0x80072ee7. To perform this, you need to follow the steps given below:

  1. At first, you have to go to the Start menu.
  2. Then, type ‘cmd’ in the search field.
  3. As a result, you will see the Command Prompt option.
  4. Right-click on it.
  5. Choose the ‘Run as Administrator’ option to run the command prompt with administrator privileges.
  6. Now type ‘sfc/scannow’ on the Command Prompt window.
  7. Then you have to wait for a few seconds until the System File Checker completes the scanning process.
  8. After that, restart the system to save the changes.

After running the SFC scan, if you still face the same issue, then you should try to run the DISM scanning. To run the DISM scan, first, you need to run the Command Prompt with administrator privileges. Then, type the command ‘/Online /Cleanup-Image /RestoreHealth’ in the Command Prompt window. Now, hit the Enter key from the keyboard to execute the command. Wait for a few times until it scans the system.

After finishing the DISM scanning, you need to check whether the error is resolved or not. If you face the same error, then you should move on to the solution given below.

Solution 3: Confirm that the DNS Client and Windows Update Services are Running

Sometimes error 0x80072ee7 can occur if the Windows Update service is not running on your computer. Some features depend on Windows Update service, and if this service is disabled, then you might face this type of errors. However, you can solve this issue by performing the steps given below:  

  1. At first, you have to hit the R and Windows key both at the same time from the keyboard to launch the Run Command box.
  2. Then, type ‘services.msc’ in the Run dialog box. Hit the Enter to execute the command.  
  3. It will open the Services window. Here, you need to find the Windows Update. Click twice on it to open the Properties.
  4. If you see that the Startup type is Disabled on the system, then you need to make sure to turn it to Manual or to another value.
  5. Tap on the Apply button. Then, tap on the Ok button to save the changes.

After that, you need to check that the error has been gone or not. If you see that the error persists, then go to the solution given below.

Solution 4: Change the Registry Permissions

According to some users, sometimes the registry might not be configured in a proper way. Then, it can cause the Microsoft error code 0x80072ee7. To solve this issue, you need to perform the steps given below:  

  1. At first, launch the Run Dialog box by pressing the R and Windows Key simultaneously from the keyboard.
  2. Then, type ‘regedit’ in the Run box and hit the Enter. Else, if you prefer you should tap on the Ok button.  
  3. Look at the left side of the new window and navigate to the ‘HKEY_LOCAL_MACHINE SYSTEMCurrentControlSetServicesTcpip.’ Right-click on the ‘Tcp Ip’ option and select the ‘Permissions’ option from the list.
  4. Now, you have to navigate to the Advanced tab.
  5. Tick the ‘Replace all child object permission entries’ box.
  6. Then, tap on the Apply button.
  7. Now, save the changes by clicking the Ok button.

After that, you have to check whether the error still persists or not. If you see that the error is not gone, then follow the steps of the next method.

Solution 5: Repair Install Windows 10 with an In-Place Upgrade

According to some users, they solve the Windows store errors by repairing the installation process of Windows 10 using an In-place upgrade. In-Place upgrade procedure can help you to repair the installation of Windows 10 from inside. But, here you require a minimum 8.87GB of available storage as well as an installation media with the higher or same version. You also have to be logged in to the system with the administrator privilege. To perform this, you need to follow the steps given below:

  1. If you use the ISO image to install Windows 10, then first, you need to mount ISO, check it and search for the setup.exe. If you have the setup disk, then you can easily use it. Run the setup.exe to initiate Windows 10 Setup.
  2. When the window prompts the UAC, tap on the Yes button.
  3. Now, the Windows Setup will start to prepare.
  4. On the next window, you have to choose the ‘Download and install Updates’ option. Then, tap on the Next button.
  5. Now, Windows 10 setup is ready to install.
  6. Tap on the ‘Accept on License Terms’ box.
  7. Then, the Windows setup will check as well as install the available updates.
  8. Now, you have to tap on the ‘Install’ option.
  9. Choose the ‘Keep personal files and apps’ option and tap on the Next button.
  10. Now, the setup will start to repair the installation process of windows 10.
  11. Next, tap on the Next button.
  12. Use the Express settings to complete the installation process. Now, sign in to Windows 10. In addition, you can also see separate or complete Repair Install guide.

After that, you have to check whether the problem is resolved or not. If the error still persists, then go to the solution given below.  

Solution 6: Register Windows Store Package

Now, you should try to fix the error code 0x80072ee7 by registering the Windows Store packages. To register it, you need to perform the steps as follows:

  1. First, go to the Start menu.
  2. Then type ‘cmd’ in the search field. As a result, it will show the Command Prompt option.
  3. Right-click on it. Choose the option ‘Run as Administrator’ to launch the Command Prompt with administrator privileges.
  4. Now, you have to run the command given below. Then, hit the Enter key from the keyboard to execute the command.

PowerShell -ExecutionPolicy Unrestricted -Command “& {$manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}”

  1. Then, exit from the Command Prompt window. Type Exit and hit the Enter. Else, you also can close this window by simply pressing the Alt and F4 keys simultaneously from the keyboard.
  2. Restart the system to save the changes.

After that, you need should try to open the Windows Store to check whether the error persists or not. If the error is still not resolved, then go to the methods given below.  

Solution 7: Delete the Static IP Entries from the Host’s File

Programs like, DNS caching utilities, Web accelerators, DNS accelerators can add the static IP addresses to the hosts file of the system to update the window. But due to failure static IP entries, you might face this error. To fix this issue, you should try to perform the manual steps given below:

  1. At first, you have to navigate to the ‘C:\Windows\system32\drivers\etc.’
  2. Then, select the ‘HOSTS file’ option from the new window.
  3. Right-click on it and tap on the ‘Open with’ option.
  4. Select the ‘Notepad’ from the list to open the host file with Notepad.
  5. If you see that the HOSTS file consists static IP address which is related with Microsoft Update or Windows update, then you need to delete those entries.
  6. Right-click on them. Choose the ‘Delete’ option from the list.
  7. Save the changes by restarting the system.

After that, you should try to go to the Windows Store. If you see that the error persists, then follow the next method given below.

Solution 8: Updating the Wi-fi Adapter Driver

Nowadays, Windows 10 comes with Fall creators Update features. Hence, it makes some changes to the Wi-Fi driver setup of Windows 10. That’s why some users lead to a low or no broadband signal. The error 0x80072ee7 can occur due to outdated or incompatible network drivers. To fix the issue, you need to update the Wi-Fi driver up-to-date with the latest Windows version. To perform this, you need to follow the steps given below:

  1. First, you have to launch the Run Command box. Hit the R and Windows Key both at the same time from the keyboard.
  2. Then, type ‘devmgmt.msc’ and press the Enter key from the keyboard to run the command.
  3. Now, you have to search the ‘Network Adapters’ option from the new window and click twice on it.
  4. Choose the ‘Update’ option after right-clicking on the Wi-Fi adapter.
  5. In the next Window, choose the ‘Automatic Search Option’ to get a better result.  
  6. Now, the Windows will start to search the drivers online.
  7. If it found any new updates, then Windows will start to install it.

Now, check whether the error is resolved.

Closing Note

In the above guide, we have provided some of the flexible ways to solve the error code 0x80072ee7. We hope if you apply the above steps in their respective order, then it will definitely help you to put an end to this bug. After successfully implementing the above methods if you still face any kind of trouble, then you need to connect with a professional. In addition, you can also share your queries and valuable feedback through the comment box given at the end of this post.

Leave a Reply

Your email address will not be published. Required fields are marked *