Windows

Why Windows can’t Communicate with the Device or Resource?

The popping up of the error message “Windows can’t communicate with the device or resource” is a common problem for the Windows users. This problem mainly appears due to the conflict with the primary DNS server that is produced through the internet service provider. This error appears at the time when you are unable to connect with the internet. There are various reasons behind this error such as misconfiguration with IPv4 or IPv6. Or the error might occur because of the problem with the network settings. Due to this problem, users get unable to access the internet.

If you are dealing with this annoying situation, then you must be looking for the solutions. That can serve you to fix the issue. So, let’s start to read our article. Hence, through this guide, we are going to provide all the possible methods that can help you to resolve your problem.

Windows can’t Communicate with the Device or Resource Fix Windows 10 Overview

Here, in this part of the article, we are going to discuss the steps that can help you to get an overview of Windows can’t communicate with the device or resource fix Windows 10. Go through the section which comes next:

Method 1: Change the IPv4 and IPv6 Settings

If you are in trouble with Windows can’t communicate with the device or resource, then the problem might be fixed by changing the IPv4 and IPv6 settings. Here, are the steps that can help you to do so:

  1. At first, you will need to press the Win key + R button both at the same time from the keyboard, to open the Run dialog box.
  2. After that, write down Control panel in the appearing dialog box and hit the Enter button.
  3. Then, click on the Network and Internet option. And choose the “Network and Sharing Center” option.
  4. Thereafter, click on the network which is showing next to the Connection section.
  5. At the next step, click on the Properties option that you can find on the bottom of the left side of your computer screen.
  6. Now, double click on the “Internet Protocol Version 4 (TCP/IPv4)” option and set both of the options to“Obtain an IP address automatically” and “Obtain DNS server address automatically”.
  7. Then, click on the OK button to save the changes that you have made. And select the “Internet Protocol Version 6 (TCP/IPv6)” option. And follow the onscreen prompts.
  8. Once you have done with the steps that we have mentioned in the previous part of the article, click on the OK button to save the changes. And check if the problem is resolved or not.

Method 2: Use the Command Prompt to Reset Connection Settings

The problem might be fixed while using the Command Prompt. This will help you to reset connection settings. The solutions that we have described in the upcoming part of the article, will help you to do so:

  1. At first, open the Run dialog box by pressing the Win key + R button both at the same time from your keyboard.
  2. Then, type Command prompt in the appearing dialog box. And click on the first result from the appearing list of options.
  3. After that, right click on the Run as administrator option.
  4. Thereafter, the Command Prompt window will appear on your screen and type the following commands. Press the Enter button after entering each of the commands.
    ipconfig /flushdns
    ipconfig /registerdns
    ipconfig /release
    ipconfig /renew
  5. After, entering each of the commands close the Command prompt and Restart your computer.

Method 3: Reset the TCP/ IP Settings

The problem might appear due to the corrupted TCP/ IP internet protocol. So, you should reset the TCP/ IP settings in your Windows operating system. If the steps are unknown to you, then you should follow the steps that are written below:

  1. At first, visit the official website of Microsoft and double click on the downloading option to download the TCP/ IP utility.
  2. After that, click on the Next button which is located at the bottom of the right corner of your computer screen.
  3. Then, follow the onscreen prompts to proceed with it.
  4. After, completing the steps from the above Restart your computer.

Method 4: Reset Drivers of the Network Device

Sometimes, the problem might appear due to the wrong driver installation. So, try to reset the drivers of the network device and check if the problem is resolved or not:

  1. At first, launch the Run dialog box by pressing the Win key + R button both at the same time from your keyboard.
  2. Then, write down devmgmt.msc in the appearing dialog box and press the Enter button from your keyboard. This will help you to open the Device Manager on your computer.
  3. After that, open the network adaptor and find out the Hardware option. Then right click on it and click on the Uninstall button.
  4. Thereafter, a pop up will appear on your screen while asking for UAC confirmation, click on the Yes button and proceed with it.
  5. Now, right click on your computer screen and click on the Scan for hardware changes option.
  6. Then, reboot the system and verify your system to see if the problem is fixed or not.

If the problem remains the same, then you should visit the official website of the manufacturer and download the latest version of drivers by following the steps which are mentioned below.

  • At first, you will need to open the device manager, then right click on the Ethernet hardware. Then, click on the Update driver software option.
  • After that, click on the “Browse my computer for driver software” option. And install the required driver.
  • Now, reboot the system.

Method 5: Restart the Modem and Router

If you are still dealing with the same problem, then you should restart the modem and the router. The following steps will help you to do so:

  1. Take your Router and turn it towards its back and find out the Reset button.
  2. After, finding it press and hold the button to reset it.
  3. Then, connect your router with the computer and check the Wi-Fi network to see if the problem still appears or not

Method 6: Change the Google DNS Settings

If none of the methods from the above to fix your problem, then you should change the Google DNS settings in the system. The steps which are described in the upcoming part of the article will aid in performing it with any hassle:

  1. At first, move on to the Properties option of the internet hardware by following the steps that we have mentioned before.
  2. Then, double click on the “Internet Protocol Version 4 (TCP/IPv4)” and change the DNS server.
  3. After that, click on the “Use the following DNS server addresses” and set the following values:
    Preferred DNS server: 8.8.8.8
    Alternate DNS server: 8.8.4.4
  4. Now, press the OK button and check if the problem still remains the same or not.

We Wrap it Up

Through this guide, we have tried to provide you all the possible solutions that can help you to fix your problem with Windows can’t communicate with the device or resource. If you have any more questions regarding this topic, then you can comment us on our comment section.